FUELTEC MULTI-TANK OPTIONS
Two tank fuel polishing system with programmable controller and electric tank selection valves

MULTI-TANK FUEL POLISHING OPTIONS

  • Maintain clean, dry fuel in one, two, three, or four fuel storage tanks with one automated system.
  • Easy installation with all supply and return valves located and pre-wired within the rain tight equipment enclosure.
  • The system’s options include: electric ball valves, manifolds, wiring, plumbing, and programming.
  • No need for field wiring or valve installation.
  • It’s all assembled at the Fueltec factory.
  • Just add power to the system and install piping to the fuel storage tanks.

First, select a basic one tank system: CF4.0, CF8.0, or CF19.0

Second, add a SKU part option from the chart below for the number of tanks at your site.

For a two tank system… Add SKU 100037

For a three tank system… Add SKU 100043

For a four tank system… Add SKU100070 

  1. First, select a basic one tank fuel polishing system: CF4.0, CF8.0 or CF19.0.
  2. Second , add a SKU part option from the chart below for the number of tanks at your site.
  • For a two tank system …..Add SKU 100037
  • Add SKU 100043 for a three tank system
  • Add SKU100070 for a four tank system

  • Fueltec’s multi-tank systems are designed for easy installation on site.
  • All control valves for supply and return fuel flow are mounted within the equipment enclosure and tested at the factory.
  • No on-site wiring of control valves is required.
  • Just connect electric service to the system.
  • Then run piping to the storage tanks and you’re good to go!